-
A full range of
BOP rams is
available
including pipe,
blind, shear,
variable bore
and specialty
-
Utilizes Type U
rams
-
CNC
manufacturing
provides
repeatable
dimensional
control
-
7-1/16" Bore
thru 26-3/4"
-
Work pressure
thru 2,000PSI to
15,000 PSI
-
BOPs are
available for
high pressure,
severe H2S
Service
-
Hydraulic stud
tensioning
available on
larger sizes to
ensure that stud
loading is
consistently
accurate and
even.
-
Bonnet seal
carrier is
available to
eliminate the
need for high
makeup torque on
bonnet studs and
nuts.
-
Hydraulically
operated locking
mechanisms,
wedgelocks, lock
the ram
hydraulically
and hold the
rams
mechanically
closed even when
actuating
pressure is
released. The
operating system
can be
interlocked
using sequence
caps to ensure
that the
wedgelock is
retracted before
pressure is
applied to open
the BOP.
-
Ease of
integration. All
parts with
dynamic sealing
surfaces in the
assembly can be
replaced in the
field.
-
Standard Flange
and Hub. Type
6BX flanges are
standard for
10,000 and
15,000 psi
working
pressures and
for 5000 psi for
13-5/8"and
larger bore BOPs.
-
Side outlets to
4-1/16" 7-1/16"
on 21-1/4" BOPs
can be provided
beneath each set
of rams on
either or both
sides of MU BOPs.
Side outsets can
be studded,
open-face flange
or clamp hub
with the same
pressure rating
as the vertical
run connections.
-
The preventers
are controlled
with hydraulic
system and
operated through
the remote
control station
or driller's
control panel
and can be
opened or closed
rapidly and
reliably, and
operated easy
and lightly
